stand cover

VIMAV

Stand: C09
Horeca technology
https://www.ets-bouhous.dz/

About us

La qualité sonore est cruciale,
En plus des types de musique, la qualité de votre système audio est tout aussi importante. C’est pourquoi il est essentiel de rechercher une installation audio de haute qualité et facile à utiliser.
La mission de VIMAV est d’offrir des solutions sonores uniques et surtout fiables qui élèveront votre activité hôtelière à un niveau supérieur. Nous disposons d’une gamme éprouvée de haut-parleurs, d’amplificateurs et de nombreux autres équipements qui vous aideront à créer une expérience client inégalée.
De plus, nous avons mis en place des collaborations avec des services de streaming professionnels pour proposer des listes de lecture sur mesure avec de la musique sous licence et donner à votre entreprise une ambiance de marque cohérente.

Products & services

product-image

Pro5 v4 Moniteur 5

Superbe finition design “suédois” ultra moderne, pour sublimer votre déco quelqu’en soit son utilisation et l’endroit où elle se trouve en Studio ou en privé. Puissante et bi-amplifiée (50 + 25 Watts RMS), équipée dans le grave d’un haut-parleur de 13cm (5 pouces) et d’un évent de type « bass-reflex » sur l’avant, permettant un placement facile avec une proximité rapprochée du point d’écoute, d’un nouveau tweeter à dôme en néodymium (1 pouce) et d’une nouvelle électronique pour encore plus de rapidité, de dynamique et de présence.

product-image

SYSTEME DE SONORISATION IBIZA PKG15A-SET 15/38cm – 2 x 500W

Système de sonorisation complet avec animation lumineuse du boomer. Branchez directement votre carte SD ou clé USB pour écouter vos musiques préférées à l’occasion de fêtes entre amis ou bien écoutez la musique de votre MP3 ou Smartphone grâce à sa connexion Bluetooth.Contenu :ENCEINTE ACTIVE avec TUNER FM, lecteur USB/SD + BLUETOOTH 15″/38cm -2 x 500WENCEINTE PASSIVE2 SUPPORTS D’ENCEINTEMICROPHONETELECOMMANDECORDON SPEAKON DE 5m

product-image

TS 415

L’Alto Professional TS415 est une enceinte amplifiée Bluetooth conçue pour offrir une sonorisation puissante, claire et flexible. Dotée d’un amplificateur classe D de 2500 W, elle intègre un woofer de 15 pouces et un moteur HF céramique de 1,4", pour une pression sonore allant jusqu’à 132 dB. Grâce à sa connectivité Bluetooth® avec fonction True Wireless Stereo et son application mobile gratuite, la TS415 se configure facilement à distance. Elle propose 4 modes DSP pour adapter le rendu selon l’usage (voix, DJ, scène...). Avec son mixeur 3 canaux intégré, ses multiples entrées/sorties XLR/TRS, et son design polyvalent (sur pied, suspendue ou retour), cette enceinte Alto s’adapte aux prestations live, installations fixes ou DJ sets. Robuste et légère, elle allie performance, connectivité et simplicité.

product-image

WX502 Enceinte murale universelle 5 1/4

La WX502 est une puissante enceinte 2 voies performante, adaptée à une grande variété d’applications, garantissant une reproduction fidèle et fidèle de la musique et de la parole. Elle est équipée d’un tweeter à dôme de 1″ et d’un haut-parleur de graves de 5 1/4″, délivrant une puissance de 50 watts. Elle s’intègre aux systèmes standard 8 ohms, mais aussi aux systèmes de sonorisation 70/100 V, avec des puissances de 40, 20 et 10 watts. Son élégant boîtier synthétique est disponible en deux coloris (noir et blanc), lui permettant de s’intégrer à tous les environnements, de l’intérieur standard à l’intérieur design. Le support de montage en acier inclus permet un montage horizontal et vertical, ainsi qu’une focalisation optimale de l’enceinte. Un réseau de protection avancé intégré protège le tweeter contre les surcharges.

product-image

WP523 Mélangeur mural à distance pour LX523

Le WP523 est un mixeur mural déporté conçu pour être utilisé en association avec le système d’enceintes actives LX523. Il convertit le signal provenant d’une source audio stéréo de niveau ligne (lecteur CD, tuner, lecteur MP3, etc.) ou d’un microphone symétrique au niveau correspondant à l’entrée différentielle du LX523 (RJ45). Il permet ainsi de transmettre un son de haute qualité sur de longues distances entre le panneau mural et l’enceinte, grâce à un simple câblage CAT5 à paires torsadées.

product-image

VIRO5 Enceinte compacte et performante

Le VIRO est un puissant haut-parleur de performance à 2 voies conçu pour une utilisation en extérieur et en intérieur, garantissant une reproduction fidèle et haute fidélité de la musique et de la parole dans tous les environnements, allant des applications résidentielles aux applications extérieures les plus exigeantes dans les parcs, les hôtels et même les clubs. Fabriqué en aluminium de haute qualité avec une attention particulière portée aux détails, le choix des matériaux va bien au-delà de l’esthétique. Il offre également des propriétés acoustiques supérieures grâce à sa rigidité et à ses surfaces sans jointures qui éliminent toute distorsion sonore.

product-image

CMX230 Microphone à canon

Le CMX230 est un microphone canon professionnel composé d’une capsule à condensateur à électret arrière, montée sur un col de cygne flexible avec embase XLR. Sa taille compacte, sa directivité élevée et sa grande orientabilité le rendent idéal pour de nombreuses applications telles que les conférences, les sonorisations, les annonces, etc. Sa large réponse en fréquence et son faible niveau de bruit garantissent une excellente qualité sonore, tandis que ses caractéristiques directives isolent les bruits indésirables.

product-image

M86 Microphone à main professionnel

Les M86 et M87 sont des microphones dynamiques supercardioïdes professionnels et fiables, parfaitement adaptés à une utilisation sur scène. Leur construction robuste, avec une grille résistante protégeant la membrane des chocs, les rend idéaux pour une utilisation en intérieur comme en extérieur. L'élément en néodyme haute sensibilité garantit une reproduction sonore et vocale parfaite, appréciée par un large éventail de chanteurs et de musiciens. Ils constituent ainsi les microphones parfaits pour les artistes et les instruments. Grâce à leur directivité unidirectionnelle (supercardioïde), le Larsen est réduit au minimum. Les M86 et M87 sont identiques et présentent les mêmes caractéristiques, à l'exception de l'interrupteur marche/arrêt, présent uniquement sur le M87

product-image

KYRA24 Enceinte colonne

L’enceinte colonne design KYRA24 est composée de 24 haut-parleurs large bande à cône en aluminium haute qualité de 2 pouces, offrant une clarté exceptionnelle et un son détaillé. Sa puissance admissible continue atteint 240 watts et son faisceau de 174° x 7° (-6 dB en moyenne entre 1 kHz et 4 kHz)* en fait la solution idéale pour les salles acoustiquement difficiles, réduisant l’écho et le larsen, optimisant ainsi l’intelligibilité de la parole dans les lieux réverbérants.

product-image

KYRA12

L’enceinte colonne design KYRA12 est composée de 12 haut-parleurs large bande à cône en aluminium haute qualité de 2 pouces, offrant une clarté exceptionnelle et un son détaillé. Sa puissance admissible continue atteint 120 watts et son faisceau de 174° x 9° (-6 dB en moyenne entre 1 kHz et 4 kHz)* en fait la solution idéale pour les salles acoustiquement difficiles, réduisant l’écho et le larsen, optimisant ainsi l’intelligibilité de la parole dans les lieux réverbérants. Un transformateur de ligne multiprise permet de le connecter à des systèmes de sonorisation 70 V/100 V avec différentes prises de puissance pour les systèmes 40 W, 20 W et 10 W et/ou à faible impédance (12 Ω).

product-image

KIT CSK100

Le CSK100 est un kit de suspension optionnel, permettant d’utiliser les enceintes de la série NELO comme solution de haut-parleur suspendu. La structure triangulaire en fil d’acier peut être vissée dans les bagues filetées à l’arrière des enceintes de la série NELO, tandis qu’un fil d’acier de 3,5 mètres permet de la fixer à n’importe quel plafond ou surface possible. Cela offre une solution rapide et simple pour transformer la série NELO en une solution de pendentif d’entrée de gamme.

product-image

FX1.18 Caisson de basses à haut rendement 18

La série FX est une gamme de systèmes d’enceintes unique et polyvalente. En combinant le caisson de basses FX1.18 avec l’enceinte active 3 voies FX3.15, ce système véritablement modulaire s’adapte à toutes les applications exigeant un système puissant, d’une clarté et d’une qualité sonore exceptionnelles. Les caissons compacts sont recouverts d’une peinture texturée DuraCoat durable et résistante aux rayures et sont équipés de huit poignées de transport facilitant le transport et la manipulation du système. Le cadre de fixation métallique intégré permet un montage facile et sécurisé, permettant ainsi l’assemblage de plusieurs enceintes. Le FX1.18 est un caisson de basses mono 18 pouces à haut rendement et à pavillon, conçu pour la série FX, unique et polyvalente. Ce caisson de basses à pavillon comprend un woofer de 18 pouces, offrant une puissance RMS admissible de 800 watts et une puissance maximale de 1600 watts. La sensibilité de 102 dB et le niveau de pression acoustique maximal de 131 dB, associés à une réponse en fréquence uniforme de 37 Hz à 130 Hz, assurent un renforcement précis et direct des basses fréquences, avec attaque et définition. Les connexions sont assurées par deux connecteurs d’enceintes à 4 broches, permettant la liaison entre plusieurs enceintes identiques dans un même système.

product-image

CONTROLEUR DE VOLUME VC3022

La série VC3xx2 est composée de contrôleurs de volume mural 100 Volt, permettant de régler le volume des enceintes 100 V en 11 pas de 3 dB. Ils présentent un design fin et élégant et sont fabriqués en ABS robuste, ce qui les rend adaptés aux grands projets en milieu industriel ainsi qu’aux intérieurs de maison standards. Un relais intégré de 24 volts permet de contourner le contrôleur de volume en situation de priorité, garantissant que le message est toujours clairement entendu à volume maximal. Les connexions sont réalisées à l’aide de blocs de bornes à vis, et des boîtes affleurantes et montées en surface (WB3102) sont disponibles séparément.

product-image

ENCEINTES DE SURFACE ALTI6M

L’ALTI6M est une variante des enceintes suspendues ALTI, dotée d’un support de montage en métal moulé pour les supports au mur et au plafond. Cela permet la même conception et identité du système audio sur toute l’installation, au cas où certaines zones ne permettaient pas l’utilisation de solutions suspendues en raison de la hauteur ou des structures du plafond. L’acoustique et la construction sont réalisées de manière identique, tandis que les connexions sont faites via des connecteurs AWX5™ étanches aux intempéries, cette construction est certifiée IP65.

product-image

COM24

Les amplificateurs mélangeurs de sonorisation de la série COM constituent la solution idéale pour les systèmes de sonorisation commerciaux de petite et moyenne taille. Différentes configurations de puissance de sortie et de connectivité offrent une grande flexibilité pour de nombreuses applications. Le COM24 peut délivrer une puissance de sortie de 240 W sur des systèmes à tension constante de 100 V ou des charges basse impédance de 4 ohms. Six canaux d’entrée avec contrôle de niveau individuel permettent la connectivité et le mixage avec une grande variété de sources musicales. Quatre entrées micro symétriques (XLR) avec alimentation fantôme (15 V) et deux entrées prioritaires permettent de connecter presque tous les microphones (dynamiques ou à condensateur). Deux entrées sélectionnables entre ligne stéréo asymétrique (RCA) et microphone (jack 6,3 mm) permettent de connecter n’importe quelle source, comme un lecteur CD, un ordinateur musical ou un appareil portable,

product-image

CMX826 microphone serre-tête

Le CMX826 est un microphone serre-tête à condensateur à directivité cardioïde directionnelle, conçu pour les applications professionnelles de renforcement vocal ou d’enregistrement mains libres. Sa directivité cardioïde garantit une excellente élimination des bruits de fond et du larsen, ce qui permet une utilisation dans des applications acoustiques exigeantes ou lorsque l’artiste est placé devant des enceintes ou des retours. Le support de tête réglable est léger, ergonomique et non encombrant, garantissant un impact visuel minimal. La conception à deux oreilles, recouverte d’un revêtement en caoutchouc, assure un ajustement confortable et stable, et permet un positionnement à gauche comme à droite.

product-image

CMX726 Microphone serre-tête

Le CMX726 est un microphone serre-tête à condensateur omnidirectionnel, conçu pour une large gamme d’applications vocales et vocales. Sa capsule à condensateur à électret arrière et sa réponse en fréquence plate garantissent une qualité audio irréprochable, fidèle à la voix et à l’intonation de l’orateur. Son niveau de pression acoustique élevé garantit une reproduction fidèle sans distorsion, même en cas de sons forts et puissants. Léger et ergonomique, il offre un confort optimal et un impact visuel minimal. Sa conception bi-auriculaire permet de l’utiliser même pour les performances les plus dynamiques. Un bouchon anti-goutte sur la perche empêche l’humidité d’atteindre la cellule, tandis que la perche elle-même est légèrement ajustable pour un positionnement optimal sur la joue. Un connecteur sépare le câble du microphone, permettant un remplacement rapide, un atout précieux pour une utilisation en service ou en combinaison avec différents types d’émetteurs. Le microphone est fourni avec quatre types de connecteurs, ce qui le rend compatible avec les principaux fabricants de systèmes. D’autres types de connecteurs sont disponibles en option. Disponible en noir et beige, il est fourni avec une bonnette anti-vent et un clip de fixation pour câble.

product-image

BASSO112 Caisson de basses infra-grave ultra-puissant de 12 pouces

Conçue pour les environnements exigeants tels que les boîtes de nuit, les salles de concert, les parcs à thème et les espaces d’accueil, la série BASSO combine des technologies de pointe comme le cône en fibre de carbone pure et AeroVent pour une ventilation exponentielle à faible bruit avec un savoir-faire méticuleux pour établir une nouvelle norme en matière de fidélité des basses fréquences. Axée sur une puissance de sortie ultra-élevée et une clarté sonore exceptionnelle, la série BASSO offre une solution flexible et efficace pour diverses applications. Chaque modèle est conçu pour offrir une expérience sonore viscérale avec des performances infra-sub immersives et une distorsion extrêmement faible.

product-image

AWP06

L’AWP06 est une enceinte de plafond étanche d’une puissance de 6 watts, conforme à la norme IP65. Conçue pour une utilisation dans une grande variété d’applications intérieures et extérieures, ainsi que dans des environnements humides, elle est équipée d’un haut-parleur de 4 pouces. Grâce à sa large réponse en fréquence fluide et à son haut rendement, elle assure une reproduction musicale haute fidélité et une parole intelligible avec une distorsion très faible. Elle peut être utilisée dans des systèmes basse impédance de 8 ohms ou dans des systèmes de sonorisation de 100 V, avec des puissances de 6, 3 et 1,5 watts.

product-image

ATEO 6M

La série ATEOxM est composée d’enceintes extraordinaires spécialement conçues pour les applications d’installation fixe à l’intérieur et à l’extérieur, allant des applications résidentielles modernes aux applications design les plus exigeantes dans des environnements tels que les magasins de détail, les pubs, les restaurants ou même les clubs. L’ATEO6M est la version 6 pouces, équipée d’un tweeter à dôme de 1 pouce et d’un haut-parleur médium/grave de 6 pouces. Elle assure une reproduction fidèle et fidèle de la musique et de la parole, tout en conservant une réponse en fréquence ultra-plate. Son boîtier ABS résistant aux intempéries, au design élégant et remarquable, est équipé de composants de haute qualité. Ce qui rend cette gamme d’enceintes si exceptionnelle, c’est son système de montage spécialement conçu, utilisant la technologie CleverMount+™, qui intègre parfaitement le coffret et le système de montage, pour une installation facile et esthétique. Cette enceinte design constitue la solution idéale pour les installations fixes en intérieur comme en extérieur.

product-image

APM108

L’APM108 est un microphone d’appel numérique pour 8 zones. Il est équipé d’un élément électrostatique à caractéristique cardioïde, monté sur un col de cygne de 30 cm. Un compresseur/limiteur intégré maintient le niveau de sortie du signal du microphone en permanence. L’état du signal reproduit est indiqué en façade, garantissant à l’orateur un message clair et audible en toutes circonstances. La console dispose de 8 boutons de sélection de zone et de trois boutons standard avec des fonctions prédéfinies : PTT (Push To Talk), Select All et Clear. Ces fonctions sont librement programmables grâce au logiciel de configuration APM. Associées aux groupes de relais AUDAC ARU, les consoles d’appel APM offrent un large éventail de possibilités.

product-image

ALTI4

L’ALTI4 est une enceinte suspendue à 2 voies dotée d’une combinaison de haut-parleurs de 4 pouces avec un tweeter à dôme souple de 1 pouce monté coaxialement et est équipée d’une prise de phase pour d’excellentes performances hors axe. La combinaison 2 voies, le boîtier en polypropylène de haute qualité et l’ingénierie acoustique de pointe garantissent des performances haut de gamme pour les applications exigeantes. La puissance admissible continue atteint 30 W (RMS) et la puissance maximale atteint 60 W. Les connexions s’effectuent via un bornier situé derrière le capot arrière, équipé d’un sélecteur de puissance pour le raccordement d’un transformateur de ligne 70 V/100 V avec des prises de 24 W, 12 W, 6 W et une connexion bypass 16 ohms. Le montage de l’enceinte s’effectue grâce à un câble de connexion à deux âmes en acier intégrées pour une suspension renforcée contre les chutes. La fixation s’effectue grâce à deux mousquetons à une extrémité et à une double fixation Gripple™ à l’autre. Le câble fourni, d’une longueur de 3,5 mètres, permet de s’adapter à une grande variété de hauteurs de plafond. Un cache arrière innovant, placé après l’installation, masque la connexion et la suspension côté enceinte. Les connexions côté plafond sont dissimulées par un cache-câble.

product-image

DM525 – Microphone dynamique

he compact LTC Audio DM525 dynamic microphone in black with a durable construction and quality workmanship is ideal for singing, spoken word, karaoke or podcasting. The device has switching on and off on the handle, frequency range 80 – 20,000 Hz, impedance 600 Ohms, sensitivity 53 dB or a sufficiently long XLR / Jack cable, and the XLR connector will take care of a simple connection. It will also please the practical packaging and plastic case for carrying and protection against adverse effects

product-image

LINO10

La série LINO est une série d’enceintes colonnes conçues pour une grande variété d’applications polyvalentes dans des environnements acoustiques difficiles, allant de la diffusion vocale et d’annonces aux systèmes de musique d’ambiance. Elles sont notamment utilisées dans les lieux de culte, les auditoriums, les salles de présentation, les centres de transport en commun, etc. Fabriquées en aluminium massif, elles sont dotées d’une grille frontale rigide finement perforée. L’enceinte colonne LINO10 est composée de 10 haut-parleurs graves/médiums de 2″ et d’un tweeter central de 1″ pour les hautes fréquences. Sa puissance admissible est de 40 W. Un transformateur de ligne multi-réglages permet de la connecter à des systèmes de sonorisation 70 V/100 V avec des réglages de puissance de 40 W, 20 W et 10 W (5 W pour une utilisation en 70 V uniquement). Elle offre des solutions pour des performances acoustiques uniformes dans tout type de système, même dans les lieux réverbérant, tout en réduisant l’écho et le larsen du microphone afin d’optimiser l’intelligibilité de la musique et de la parole.

product-image

The Iconyx Compact series.

Ultimate Flexibility in a Smaller Array The Iconyx Compact series brings the ultimate flexibility of the Iconyx to a smaller footprint array. An all-new, twen ty-four channel digital amplifier powers twenty-four 3”/ 77 mm full-range, high sensitivity, treated paper cone drivers. With an amplifier and DSP channel for each driver, all of the flexibility of Iconyx is now available in a package nearly 40% smaller than the classic Iconyx. While the package is smaller, the performance is not. Full RHAON II beam-steering with our latest U.R.G.O beam algorithms allows for a movable acoustic center, multiple beam opening angles and high-pass filtering of individual beams — all with the fidelity and musicality expected of a Renkus-Heinz product.

product-image

SONIA C5

Sonia C5 is a 5.25" in-ceiling speaker with Category cable connection, designed to enable anyone to deploy speaker systems into meeting rooms, classrooms and discussion spaces using standard IT infrastructure. Sonia C5 mounts into suspended ceiling grids using an included tile bracket and double-stepped dog ears, enabling blind installation from below. Sonia C5 features no proprietary audio connectors and is connected to a Sonia Amp using standard Category cable. Each Sonia C5 features VoiceMatch™ technology when used in conjunction with Sonia Amp/Solaro Series, enabling speech optimization for added intelligibility. Sonia C5 features a magnetic, fully-paintable grille with removable logo and offers integrated mounting for Sonia Amp, allowing the entire speaker system to be contained within a drop ceiling with no in-room racks.

product-image

Unite CDD-84

The Unite CDD-8/4 is a multifunctional device, which is used to charge the batteries integrated in the Unite transmitters and receivers as well as to store and transmit the pairing information (channel name and group ID) from the transmitter to the receiver. For optimal security against unauthorised listening, an audio encryption key will be generated inside the Unite CDD-8/4 and transmitted to the transmitters and receivers during the pairing process. The Unite CDD-8/4 can be integrated into a network by using the Ethernet connection. With the Unite Manager software the desktop charger can be monitored remotely. Furthermore, firmware updates and configurations can be carried out via this software. The desktop charger can be attached to a table top via two holes at the bottom. The Unite CDD-8/4 desktop charger provides a maximum of eight charging compartments, four of them are compatible with the Unite TH handheld transmitter. The charging state of the batteries is displayed via the status indicator on the appropriate transmitter or receiver.

product-image

Unite Cockpit Case (CC)

The Unite Cockpit Case is a multifunctional device. It charges the integrated batteries in Unite mobile transmitters and receivers, and stores and relays pairing information (channel name, group ID, audio key). For maximum protection against unauthorised listening, a group ID-dependent audio code is generated in the charger and relayed to the mobile devices during the pairing process. The charger can be integrated into a network via the Ethernet port, and combined with other Unite Cockpit chargers and Unite AP4 Access Points. The Unite Manager PC software enables further functionality within the network: monitoring, maintenance, advanced configuration, pairing and set-up of transmitters, receivers and Unite AP4 Access Points.

product-image

Unite RP Unite RP-T

The compact Unite RP bodypack receiver is ideal for guided tours. Interpretation applications and assistive listening are also possible. Headphones or an induction loop for people with hearing aids can be connected to the mini jack connection (3.5 mm). The Unite RP-T version can also be used with a headset. Furthermore, the Unite RP-T version has an integrated microphone and talkback button. This talkback function of the receiver allows the dialogue within one group. More guides or speakers can also be actively integrated. A maximum of three people can speak simultaneously within one larger group. 71.98.4003 Unite RP-T 71.98.4004 71.98.4005 or a conference room. The transmitter will only transmit the audio signal to a channel with a predefined channel name. If there are several transmitters in a group, the channel for the respective transmitter can be selected on the receiver. You will need to establish a pairing if you require several device groups or secure audio transmission that cannot be intercepted by another group using Unite devices. Features » Compact design » DECT technology for worldwide use without registration and free of charge The connection cable of the headphones, headset or the induction loop also serves as an antenna, so that the wearing comfort is not impaired by a separate antenna. Outside, the operating range is up to 300 m when the transmitter and receiver are in line of sight. The OLED display provides a brilliant, easy-to-read display of channel, battery status and various menus. The receiver can either be attached to clothing with the belt clip, or worn around the neck with a neck strap. The transmitter is powered by an integrated lithium-ion battery pack. The receiver meets the requirements for accessibility due to raised symbols on the control buttons and braille on the talkback button (Unite RP-T).

product-image

D-Cerno CU-R

D-Cerno CUR is the nerve centre for small and medium-sized meetings. The D-Cerno's technology is based on the same processing principles as Televic's high-end flagships, but is streamlined and optimized for its market segment: entry-level chat stations. This system has a unique position in the market, as it is based entirely on digital signal processing. The D-Cerno controls 50 delegate stations and can be expanded to cover 150 stations using a master/slave configuration involving multiple CPUs. The delegate stations are connected in series via 4 bus connections (4 divisions or 2 closed loops). If they are wired in a loop, a redundancy mechanism ensures that the system continues to operate in the event of a cable break or disconnection.

product-image

Plixus MME Dante

The Plixus multimedia engine is a 19” rack mountable device that provides all the processing and signal handling required for the Plixus network. The Plixus MME follows the same design philosophy as other Plixus compliant devices: a minimalistic user interface offers direct access to a number of vital functions. This makes control of the system easy and intuitive for the most common functionality. A set of distinctive, yet unobtrusive handles gives the central equipment a sleek look. A touch of brushed aluminum combined with a captivating red glow underlines the unit’s exclusivity and makes it blend in with the Televic product family.

product-image

Confidea FLEX G4 Poste de conférence sans fil

Wireless conference station Product description Unparalleled flexibility The Confidea FLEX G4 wireless conferencing system has been designed to be the all-in-one conferencing tool of tomorrow as it is equipped with a touchscreen and a button for the microphone. Only one position can be set to president, single delegate or double delegate mode. Plus, manage features, such as voting, easily by simply adding licenses. Simple wireless technology Based on Wi-Fi 5 standard technology, the Confidea FLEX G4 wireless conferencing system combines state-of-the-art techniques to improve the quality and reliability of signal reception, providing stability that is unmatched in the wireless conferencing market. This solution adapts perfectly to any meeting environment and can work seamlessly with other wireless systems.

product-image

Confidea FLEX TC

Confidea FLEX G4 16-station transport case Product description Transport and storage case for wireless conference system The Confidea Flex TC transport and storage case allows you to easily store the conference system and transport it from one place to another, you can place it in this compact storage and transport case. This case is composed of compartments to accommodate 16 Confidea FLEX G4 wireless stations accompanied by their battery, microphone and access point. In other words, you can transport a complete set for your meetings, all in a compact and mobile solution allowing installation wherever and whenever you want. The Confidea Flex TC transport and storage case allows organized and compact storage, ideal for frequent transport. It can store up to 16 FLEX devices, wired or wireless (batteries included). The upper part has a removable insert, easy to transport, intended to collect and store 16 Mike-type microphones. This ensures that all your equipment is within reach and well protected during transport. A removable compartment in the middle of the case can store an access point, an adapter and some cables. When used to store wired Confidea FLEX devices, removing this compartment creates enough space to store the cables. This way, each item has its place, minimizing the risk of loss or damage. The case has been designed for easy storage and transport from one room and/or location to another. It is ideal for professionals who have to move around regularly and want to keep their equipment in perfect condition. In other words, you can carry a complete set for your meetings, all in a compact and mobile solution for installation wherever you want, whenever you want.

product-image

ALTI6

“Pure sound, hanging around.” The ALTI6 is a 2-way loudspeaker featuring a 6.5” driver combination with a coaxially mounted 1” soft dome tweeter and is fitted with a phase plug for excellent off-axis performance. The 2-way combination with a high-quality polypropylene enclosure and acoustic engineering craftsmanship guarantees premium performance for demanding applications. HAS continuous power handling of 60 Watt (RMS) and maximum power handling of 120 Watt is achieved. Connections are made through a terminal block connector behind the rear cover, accompanied with a power tap selector switch for the tapping of a 70V/100V line transformer with tappings for 60W, 30W, 15W and a 16 Ohm bypass connection. Mounting the speaker is done through a connection cable with two integrated steel cores for suspending with an additional drop safety. Fastening is made through two snap-hooks on one end and a dual Gripple™ fixation on the other end. Tea included cable length of 3.5 meters offers possibilities for a wide variety of ceiling heights. An innovatively designed rear cover of the speaker can be placed after installation and hides the connection and suspension on the speaker end. The ceiling end connections are covered through a cable cover.

product-image

AMP203

The AMP203 is a revolutionary mini stereo amplifier, featuring network input through Dante™ or AES67 providing a complete media networking solution to distribute uncompressed audio via standard Ethernet networks with near-zero latency while allowing all other data to be connected on the same network. Various DSP functionalities are implemented in the AMP203. This allows all configurations to be made in AUDAC Touch™ 2 or via RS485 and Ethernet, making it a fully-fletched 2 x 30W amplifier. The output connector has been implemented using a 4-pin terminal block connector, featuring an output power of 30W per channel and 60W when bridged. The 3-pin terminal block stereo line output connector gives the option of looping the AMP203 to the next amplifier. Using PoE (Power over Ethernet) this extremely power-efficient amplifier receives both power and signal through a single networking cable, this way flexibility is maximized while needed cabling is kept at a minimum. The compact convection cooled enclosure eliminates any humm or buzz otherwise caused by a fan. Various optional mounting brackets are available like the MBS1xx series, which allow it to be mounted under a desk, in a closet, on the wall, on top of a dropped ceiling or to a 19" equipment rack. This proves that the AMP203 is the perfect solution for compact to medium-sized applications in corporate, hospitality or retail environments.

product-image

ARES5A

The ARES5A is a 2-way active speaker system consisting of an active and passive unit to be linked with each other. It offers an easy and flexible solution for a wide variety of applications. The 2-way loudspeaker is carefully constructed out of high quality components resulting in a 5 ¼” woofer and a ½” high frequency tweeter. This craftmanship in combination with an integrated DSP is creating an extremely clear and powerful sound experience for a wide range of applications. The integrated amplifier can deliver a power of 2 x 40 Watt and includes a stereo line input which is implemented balanced and unbalanced, allowing convenient connection to any kind of audio source. Unbalanced audio sources are connected through a 3.5 mm jack connector, while balanced sources can be connected to the terminal block input connection allowing long signal runs without interference. A volume potentiometer allows the user to adjust the level of loudness while the two band tone control allows equalization of treble and bass. The auto-standby mode reduces power consumption when no input signal is detected. The active speaker includes a stereo amplifier module, also delivering the input signal to the passive unit. A specially designed bracket system allows close to wall installation of the speakers, while the recessed bracket structure guarantees an optimal cosmetic outlook of the system. The ARES5A can be mounted both horizontally as vertically with an inclination up to 45° on both sides, enabling to position the loudspeaker in the right direction. Due to the fact that the bracket itself consists of 2 45° corners, installation in corners or even ceiling can easily be achieved. The optional MBK455 angled mounting bracket set allows for an extra inclination of 90° when needed.

product-image

ARJ03P

The ARJ03P is an RJ45 splitter / junction box which can be used for connecting and splitting any twisted pair based databus which is connected using RJ45 connectors. A typical application example is the expansion of communication and audio transferring busses whereby multiple input and/or output devices are connected to one single peripheral port on a matrix system. Another typical example is the application of an external power supply to a communication bus, for powering the remote in- or output module when the transferred supply voltage has become insufficient due to the long cable lengths. It consists of three RJ45 connectors which are a ‘BUS IN’ and ‘BUS OUT’ connector for making the incoming and outgoing connections while the third connector allows the connection for the remote in- or output module. Two termination jumpers are provided whereby the communication (Pin4 & Pin5) and audio (Pin7 & Pin8) pairs can be terminated at their characteristic impedance (120 Ohm), to ensure a clear communication without reflections. A terminal block connector is provided whereby an external power supply (+24 V DC) can be connected to the bus. The +24 V DC is available on RJ45 Pin3 (+) and Pin6 (GND). The unbreakable plastic housing allows easy mounting on Mini DIN rails

product-image

ARU208

The ARU208 is specially designed with flexibility and functionality in mind. Various ways of switching the 8 relays are provided, these include the integrated web interface, optional paging consoles and analogue contact triggering making the ARU208 AUDAC’s smartest and most innovative relay modules. With this ingenious device, switching between audio sources, signal routing, and even customized automation setups are obtainable. The bipolar relays allow switching of balanced mono signals as well as unbalanced stereo signals. Normal open and normal closed contacts are provided as well. A wide variation of signals can be switched, ranging from line-level audio signals to amplified loudspeakers signals (Low impedance or 100V) and voltage distribution (low voltage up to 240 V AC mains voltage distribution). Possibility for triggering relays through dry contact inputs, which can be used for triggering relays through external devices or actuators. Dry contacts priority over the digital functions/triggers. Typical applications are activations by external buttons, switches or alarm contacts. Thanks to its modular nature, the ARU208 is perfectly suitable for small home or retail applications as well as big installations. Integration of numerous ARU20x units in one system is possible due to the RS485 which allows daisy-chaining of multiple units. The ARU208 features an RS485 in and output connector, allowing even more convenient connections. The TCP/IP control possibilities allow integration of the ARU20x’s in any ethernet network. The integrated web-browser running an HTML5 interface allows the most flexible and complete operation while the freely available command set allows integration with any TCP/IP based control or automation system.

product-image

AXIR_O

The AXIR/O is an outdoor column speaker with a power rating of 120 Watt which is especially designed for outdoor use lending itself to a wide variety of open-air applications where audibility of music and speech is important. It features two speaker sections, each of them consisting of six 2” high quality broadband loudspeakers providing an extraordinary sound and surprisingly high power. A 100 Volt multi-tapping line transformer allows the connection of the loudspeaker in large PA systems with a power rating selectable between 40 Watt, 20 Watt and 10 Watt. A fourth selection for connection in low impedance audio systems is provided too. To guarantee the optimal performance and long term reliability in outdoor circumstances, various specific features are provided. The connection of the loudspeaker is performed using a waterproof rotatable AWX-5 connector whereby the desired power tap can be selected depending on the rotation of the connector. Secondly, the 12 drivers receive a special coating to protect them from the elements while an acoustically transparent and water-repellent cloth in front of each driver keeps penetrating water at a safe distance. Further added reliability is achieved by using an aluminum front grill and an electroplated stainless steel mounting bracket. Together, these improvements result in a weatherproof IP55 column speaker of exceptional quality and design! The included mounting bracket allows the speaker to be focused into any direction to obtain the best possible audibility. Available in white (AXIR/OW) and black (AXIR/OB).

product-image

CALI424

The CALI424 is a 2-way ceiling speaker with rear dome, constructed using a 4” cone driver, combined with an coaxially mounted 1” soft dome tweeter which is fitted with a phase plug for excellent off axis performance up to 155°. The 2-way construction combination with metal rear-dome guarantees premium performance for demanding applications. A continuous power handling of 30 Watt (RMS) and maximum power handling of 60 watt is achieved, while fitted with a rotary switch for tapping of the 70/100V line transformer with tappings for 24W, 12W, 6W and an 8 Ohm bypass connection.

product-image

CHA530

The CHA530 is a 2-way horn loaded loudspeaker which is designed for long-throw, full range reproduction of music and speech in a wide variety of indoor and outdoor applications. The construction is composed of a 1" high frequency compression driver and a 5" mid/low frequency driver. The selection of high-quality components and acoustic engineering craftmanship makes the CHA530 significantly better performing than other traditional horn speakers. A smooth frequency response and high efficiency ensures an extraordinary clarity of speech and extended frequency response for music. It features an RMS power handling of 30 Watt and a max power handling of 60 Watt. The sensitivity measures 98 dB while a maximum continuous SPL of 113 dB can be achieved. The frequency response (±3 dB) starts from 110 Hz up to 16 kHz. A multi-tapping line transformer allows the speaker to be used in 100 Volt and 70 Volt public address systems. It is connected using a waterproof rotatable AWX-5 connector whereby the desired power tap is selected depending on the rotation of the connector. Various power tappings for 30 Watt, 15 Watt, 7.5 Watt and 3.75 Watt are available. The enclosure is constructed using high quality UV and impact resistant ABS materials and an included stainless steel mounting bracket allows secure mounting and tilting for perfect directional placement. This makes it comply with IP66 ingress protection requirements, resulting in a weatherproof solution for permanent outdoor installation.

product-image

HS121

The HS121 is a full range sound projector based on a 4" driver especially designed to provide quality sound with a long throw range in a wide variation of in- and outdoor applications. Its wide, smooth frequency response and high efficiency ensure high-fidelity music reproduction along with superb projection of clear and intelligible speech at very low distortion. It delivers a power of 20 Watt RMS in standard 8 Ohm systems with a maximum power of 40 Watt but it can also be used in 100V PA systems. The 100V line transformer has power taps for 20 Watt, 10 Watt and 5 Watt which can be selected by the special designed 5-pin waterproof connector. This connector allows selecting the desired power tapping depending on the angle of rotation of the connector. The housing is made of the strongest ABS material in a light-grey colour, ensuring a smooth blend of the loudspeaker in all different kinds of environments. The IP rating of IP65 makes it suitable for indoor as well as outdoor use. For safety reasons, the speaker is provided with an internal steel safety cable, which prevents the speaker from falling, even in situations where the housing of the speaker has been damaged or broken.

product-image

HS212T

The AUDAC HS212T is a full-range loudspeaker system engineered to provide long throw, full range sound projection in a variety of fixed in- and outdoor applications. Its wide, smooth frequency response and high efficiency ensure high-fidelity music reproduction along with superb projection of clear, intelligible speech at very low distortion. The HS212T features a 1,8” HF driver with an 12” LF loudspeaker combination for the best sound reproduction and has a very special coverage pattern of 40° horizontally and vertically. The HS212T contains the possibility to choose from power tapping for: - 240 Watt, 120 Watt, 60 Watt @ 100V - 8 Ohm impedance. The construction of the HS212T is made of polyester with textured EDPM black coating and a perforated aluminum grill front finish. Behind the aluminum grill, there’s an acoustic foam assembled, which prevents rain coming into the speaker. Due to an Ingress Protection rating (IP) of 65, this speaker is suitable for any environment where humidity or moisture are present. At the rear, you’ll find cable clamps to select the line transformator as desired. The cable clamps are shielded to obstruct moisture and humidity. Mounting brackets: - MBK212Z (Stainless Steel)

product-image

IMEO1

With its slim and elegant design, the IMEO1 soundbar has all the features required for the expansion of any AV system, and delivers impressive sound, with minimal installation. It is ideally suited for installations such as classrooms, conference rooms or meeting rooms where it can be used and installed in combination with screens, bulletin boards or projectors. The acoustic diffusion system with a total power of 60 Watts RMS consists of two 1.5" high-frequency drivers with a power of 15 Watts RMS and a low-frequency section consisting of two 2.5" drivers with a power of 30 Watts RMS. The Class-D amplifier incorporates DSP processing and automatic frequency balance management transmitted to the bass and treble drivers. The IMEO1 soundbar offers crystal clear sound reproduction with an amazing low-frequency response. Several DSP presets allow for optimized EQ for applications such as presentations, music playback or videos. The IMEO1 bar has many inputs such as an unbalanced line input, an HDMI (ARC) or SPDIF (optical and coaxial) input allowing compatibility with a variety of input sources, while Bluetooth allows wireless connections with portable devices. An infrared remote control allows you to select the inputs, volume and EQ preset, while the clever wall mount allows for convenient wall mounting on any type of surface or location, while optimally hiding cables. Firmware Update V0.07

product-image

LINO4

The LINO series are column speaker series designed for a wide variation of general-purpose applications in acoustic difficult environments, ranging from speech and announcement applications to background music systems. Typical applications are houses of worship, auditoria, presentation rooms, public transportation hubs, … and many more. They are solid constructed using solid aluminum materials and finished through a rigid finely perforated front grill. The LINO4 column speaker consists of 4 x 2” low/mid-frequency drives with a 1” central positioned tweeter for the high frequencies. It reaches a power handling of 20 Watt, while a multi-tapping line transformer allows it to be connected in 70V/100V public address systems with power taps for 20W, 10W and 5W (2.5 W for 70V use only). It offers solutions for uniform acoustic performance in any type of system in reverberant venues, while reducing echo and microphone feedback to optimizes the intelligibility of music & speech. Mounting is done through an L-shaped bracket on top and bottom, offering optimal flexibility for fixation and directional placement. The distance from the speaker to the wall is 10mm, while it can be vertically inclined 4°. Connections are made through multi-tapping terminal block connector and A multi tapping line transformer allows them to be connected to 70/100V public address systems with various power tapping settings, while connections in low impedance systems are also possible.

product-image

MFA208

This revolutionary award-winning amplifier is designed as a two channel amplifier using class D amplifier technology. It can be used for powering low impedance stereo systems with a maximum power of 2 x 40 Watt, while bridging to a constant voltage (100V and 70V) is possible with a maximum output power of 80 Watt. A switch-mode power supply allows a wide variation of main voltages for global compatibility. The integrated SourceCon™ module* slot allows the implementation of any available compatible module, offering a true all-in-one solution. Typical applications are the implementation of an audio streaming module or internet radio module. Additionally, a stereo line input allows connection for any kind of external audio sources. A balanced mic/line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled and compatibility with line-level sources (e.g. voice file players) is guaranteed by wide gain adjustment (0 dB ~ +50 dB). This gain adjustment controls both the sensitivity of the line inputs on the rear as on the front. Thanks to the 2.8” TFT display and the push rotary dial on its front, an unmatched user experience is achieved. Please pay attention the RCA input is combined with the line input at the back of the device, meaning the rear input is disabled when the front input is in use. A line out connection at the back of the device is making the device even more versatile. This line out can be used as a preamp output, where the input and volume are the same as the internal amplifier or as a separate secondary stereo zone output, where both zones (inputs, volume control, and many more..) can be operated completely independently of each other.

product-image

MFA216

This revolutionary award-winning amplifier is designed as a two channel amplifier using class D amplifier technology. It can be used for powering low impedance stereo systems with a maximum power of 2 x 80 Watt, while bridging to a constant voltage (100V and 70V) is possible with a maximum output power of 160 Watt. A switch-mode power supply allows a wide variation of main voltages for global compatibility. The integrated SourceCon™ module* slot allows the implementation of any available compatible module, offering a true all-in-one solution. Typical applications are the implementation of an audio streaming module or internet radio module. Additionally, a stereo line input allows connection for any kind of external audio sources. A balanced mic/line input allows connection for an announcement microphone with compatibility for condenser microphones using the integrated phantom power supply (15V). A priority switch overrides the background music when enabled and compatibility with line-level sources (e.g. voice file players) is guaranteed by wide gain adjustment (0 dB ~ +50 dB). This gain adjustment controls both the sensitivity of the line inputs on the rear as on the front. Thanks to the 2.8” TFT display and the push rotary dial on its front, an unmatched user experience is achieved. Please pay attention the RCA input is combined with the line input at the back of the device, meaning the rear input is disabled when the front input is in use. A line out connection at the back of the device is making the device even more versatile. This line out can be used as a preamp output, where the input and volume are the same as the internal amplifier or as a separate secondary stereo zone output, where both zones (inputs, volume control, and many more..) can be operated completely independently of each other.

product-image

MPX88

The MPX series are paging microphones specifically designed for use in combination with MTX series audio matrix systems. The MPX88 is the 8-zone system allowing it being used in combination with an MTX88 8-zone audio matrix system. The modern shaped enclosure is finished with a real glass front panel provided with an anti-glare coating. This offers a microphone with elegant outlook which will be appreciated in any office or even design interior environment. The controls are integrated in the glass panel through capacitive touch button principle without any mechanically moving parts, same as the indicator LED’s which are completely blended. This guarantees a real high-end outlook and user experience. An integrated chime tone is audible before each announcement. Announcements are made through the integrated pipe-neck microphone with a cardioid pickup pattern, which can be tilted to the desired angle. Both zone selection and data bus indicators are implemented, giving an overview of the systems current operation mode and data bus occupation. Quick operation is made possible using the ‘select’ & ‘clear all’ buttons, while the ‘push-to-talk’ (PTT) button must be pressed during announcements. Connection to the matrix system is done through a fixed connection cable with a length of 2 meter. This distance can be extended to a maximum length of 300m using standard CAT5E (or better) twisted pair cabling. Cascading multiple paging stations is possible using the priority-based (user-configurable) databus, when using the additional junction box ARJ03P.

product-image

MTX88 8-zone audio matrix

The MTX88 is the eight-zone version of the MTX series, containing two balanced microphone inputs with priority function, phantom power possibility and three-band tone control. Four stereo line-level inputs are provided where to any line-level music source such as a CD-player, Tuner or MP3 player, ... can be connected. The other two inputs of the matrix are the additional wall panel inputs for both line and microphone signals. The MTX can be controlled by means of additional control panels, its fully functional web based interface or the iPhone/ iPad Remote app. The RS232 port makes the MTX compatible with any home & industrial automation systems supporting RS232. The front panel of the MTX shows a rotary button per zone with indication LEDs for accessing controls and settings. A built-in PFL loudspeaker makes it possible to pre-listen every channel without the need for a headphone. The balanced line-level zone output connections are performed using 3-pin Euro-terminal block connectors, each of them accompanied with an RJ45 connector for connecting additional wall panels for that zone. A 24 volts power connection makes it possible to keep the MTX running on emergency power, even if the main power is shut down.

product-image

MWX65

The MWX65 is an all-in-one wall panel controller to be used in combination with the AUDAC MTX series multi-zone audio matrix systems. It can control the input signal and volume for one zone and also contains an additional line and microphone level input which can be patched to the zone it is connected to. Both input selection and volume control as well as two band tone control can be controlled using the versatile rotatable push-dial while the integrated 2.5” graphical display ensures a user friendly experience. An XLR connector is provided as additional microphone input while the line input is performed using RCA connectors. The signals applied to these inputs can be used as one additional local input. This enables you to connect any CD or MP3 player as local music source or connect a microphone for speeches or other announcements. The input mixing can be done by using both push-lock potentiometers. The microphone input has the possibility to provide 12V phantom power which can be turned on and off by software configuration. The wiring between the matrix and the wall panel should be performed by using standard UTP CAT5 cabling which transfers both the control and audio signals to the matrix while providing the power supply for the wall panel.

product-image

NCP105 Universal networkPoE wall panel controller

The NCP105 is a universal network wall panel controller, with 4 programmable capacitive touch buttons and a programmable push rotary encoder. Each button is provided with an RGB LED indicator, while the RGB LED ring indicator gives the user feedback on the selected settings or audio level. The IP-based communication makes it future-proof while also being backward compatible with many existing products. Besides the elegant design, the front panel of NCP105 is finished with high-quality fingerprint-resistant glass and a name tag window for each button that allows a custom name tag to be added behind the panel, offering a neat finish while having a clear overview of the configured functions. The configuration of the button functions and the rotary dial is entirely flexible, with full compatibility of all AUDAC Touch functionalities. The design of NCP105 allows it to be used in many network based applications done with Atellio family products or any third-party device, from amplifiers to speakers and processors, the choice is yours. The wall panels are compatible with standard EU-style in-wall boxes, making the wall panel the ideal solution for solid and hollow walls. Black and white colour options are available to blend into any architectural design.

product-image

NIO222

NIO series are Dante™/AES67 network I/O mixing breakout boxes featuring terminal block input and output audio and Bluetooth connections. The audio inputs can be switched between line-level and microphone-level audio signals and phantom power (+48 V DC) can be applied to the input connectors for powering condenser microphones. Various further integrated DSP functions such as EQ, automatic gain control, and other device settings can be configured through the AUDAC Touch™. The IP-based communication makes it future-proof while also being backwards compatible with many existing products. The NIO series is compatible with any PoE network-based installation thanks to the limited PoE power consumption. The networked I/O expanders are compatible with MBS1xx setup box installation accessories which allow them to be mounted under a desk, in a closet, on the wall, on top of a dropped ceiling or a 19” equipment rack.

product-image

PRE116 Préampli 6IN1 Stéréo

The PRE116 6-channel stereo preamplifier offers the ideal solution for a wide variety of applications where multiple music sources need to be mixed and distributed via a single area audio system. It's reliable, easy to install, and simple to use, but still offers the ability to connect and control all kinds of music sources. The PRE116 is built as a six-channel stereo preamplifier of which two channels are balanced mic inputs that offer three-band tone control, gain control, phantom power, and ducking function. Phantom power provides 15V voltage to the corresponding microphone channel to power the condenser mics. When ducking is enabled, other music sources are attenuated when a microphone signal is present. The other four channels are direct line inputs, one of which is stereo and balanced. All channel connections and adjustments are made on the back of the PRE116 while on the front panel, all individual channel volume control knobs are available as the general output volume control with two tone control strips.

product-image

PRE126

The PRE126 is a two-zone stereo preamplifier with 2 mic inputs, 4 stereo line inputs, and all the necessary control and connection possibilities. The control functions are located at the front. Each channel has a volume control, an LED clip indicator, and two push buttons and LED indicators to control signal routing. The output section of each zone is equipped with level control, master volume control, and two-band tone control. The PRE126 offers 2 XLR mic inputs with a gain control, a 3-band tone control, a phantom power switch, and a ducking switch. Channel 1 is a stereo line-in channel, equipped with 2 balanced XLR connectors, a mono/stereo switch, and a gain control. Channels 2, 3, and 4 are stereo line inputs equipped with two RCA connectors and gain control. Each output zone has two balanced XLR connectors with a mono/stereo switch.

product-image

SMQ750

The SMQ series are quad channel power amplifiers providing a new standard for affordable audio amplification in both fixed and mobile audio installations. Their advanced features and availability in different output powers for 350 Watt, 500 Watt, 750 Watt and 1250 Watt provide an enormous flexibility for numerous applications. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Acoustics can be optimized using Butterworth, Bessel and Linkwitz-Riley filters with selectable rolloff which can be configured as Low / High & Band Pass and the 7-Band equalizer which has adjustable frequencies and Q-factor. Other provided functions are delay and dynamic bass boost. These settings can be custom configured using the front panel of the amplifier, whereby access can be given on two different levels (User & Administrator) using password or USB-key protection. Loudspeaker protection is provided by an output power limiter whereby the maximum output power for every channel (in Watt) can be configured. Configuration is made simple with loudspeaker presets and full system configurations which can be selected from a library and uploaded with an USB flash drive. This ensures the best acoustical performance with a bullet-proof loudspeaker protection. Great flexibility and source compatibility is achieved via the input selection matrix combined with the XLR and terminal block signal connections. The outputs are made using Speaker and Terminal block connections. System integration is made easy using the RS-232 control port. An optional Dante™ interface is available for the WaveDynamics™ amplifiers. The installation of this network interface allows receiving and sending of low latency, high quality audio over a standard Ethernet network.

product-image

SP20

The SP series are high efficiency sound projectors designed to provide good speech intelligibility and background music in a wide variation of applications. They are all weather-proof treated to be used indoor as well as outdoor and are perfect suited to be used in large 100V broadcast systems such as train stations or airports. They all meet the IP56 Ingress Protection standard. The SP20 is a high-efficiency sound projector with an RMS power of 20 Watt, designed to provide good speech intelligibility and background music in a wide variation of applications. It is fitted with a 5" broadband loudspeaker and the power is adjustable by the integrated 100V line transformer with power taps for 20 Watt, 10 Watt, 5 Watt and 2.5 Watt at 100 Volt. The speaker can be easily mounted to any wall or ceiling by using the stainless steel mounting bracket. Thanks to the weatherproof treated ABS housing with white or cream weatherproof coated aluminum grill, the speaker has a IP rating of 56 whereby it can be used indoor as well as outdoor for a wide variation of applications.

product-image

Centrale d’alarme vocale avec clavier VAP1-FES 7Z

Panneau de commande de pompiers pour microphone d’urgence selon EN 54-16 pour le raccordement à des appareils de commande et d’indication d’alarme vocale (VACIE) de la série de produits NEO. L’article se compose d’une unité de base, d’un microphone d’urgence (selon EN 54-16) et d’un clavier à 7 zones, pré-assemblés dans un boîtier approprié. Le boîtier en tôle d’acier, fini en RAL 3000 (rouge feu), a une porte avec une fenêtre en verre et offre une vue sur les LED d’état et les éléments de commande ci-dessous. La porte est dotée d’un insert de verrouillage avec pêne de verrouillage. Connexion au VACIE via le bus ACSI (par exemple câble d’installation 2x4x0,8mm, CAT6, etc.), connexion simplifiée à l’aide de bornes à vis Phoenix.

News